Shaoxing Keqiao Yasige Sanitary Ware Co.,Ltd.

Teach you the points to note when choosing a shower room glass door

　　 The shower room can be divided into two types-simple shower room and integral shower room. At present, more and more people use simple shower rooms. Due to its simplicity and stylish appearance, many newly renovated families plan to buy them. At present, the price of a shower room on the market ranges from more than 1,000 yuan to more than 10,000 yuan, from 300 yuan per square meter to 800 yuan per square meter. The difference is mainly in the quality of the glass door and the quality of the accessories. 　　 Many people think that the thicker the tempered glass, the better, but this is not the case. The most important thing in the shower room is the degree of tempering of the tempered glass. The thickness of the glass mainly only affects the shape of the shower room. Some of the cheaper shower rooms on the market are mostly produced by small workshops without production qualifications, and then labeled with the brands of regular manufacturers. 　　 In order to reduce costs, many small manufacturers even use semi-tempered glass or hot-bent glass. Shower rooms made of these glass are susceptible to external factors. For example, if you use hot water in winter or cold water in summer, it is likely to burst, and the broken glass ballast will have sharp edges and corners, which can easily hurt people. The safety performance of tempered glass produced by regular manufacturers is very high. 　　 In addition, the handles, rollers and other accessories of the shower room should not be ignored. Because the tempered glass will automatically burst if a small corner damages the whole glass. It is best to choose copper and stainless steel as accessories, which are not easy to rust and last longer. So, what issues should consumers pay attention to when shopping? I have a few tips for everyone: 　　 1. Don't try to be cheap, buy products with outer packaging, brand, factory address, and certificate, and try not to buy products without outer packaging. The glass must have the tempered glass CCC certification and brand logo. 　　2. Knock the glass with knuckles, the sound of tempered glass is clearer, while the sound of ordinary glass is dull; 　　3, the authentic tempered glass will have faint patterns when you look carefully; 　　4. After purchase, the manufacturer is required to install it on site, so as to avoid improper installation and increase the risk factor and the possibility of self-explosion of the glass.

→

Clean the shower room reasonably so as not to endanger the safety of the glass

1. For the yellow water stains on the shower room glass, you need to spray it with a glass cleaner, and then wipe it with a dry cloth to be bright as new; and for the hardware accessories used in various parts of the shower room, you cannot use detergent to avoid corrosion The best way is to wipe the surface with a dry cloth regularly to keep it clean. 2. For water stains in the glass room, you can go to the supermarket to buy a glass scraper that fits the size of the glass door of your own shower room (they are available in the supermarket, plastic or metal brackets and handles, embedded with rubber strips, the length must be the same as your own The length of the glass in the shower room is about the same. If it is too long, it will be inconvenient). After the shower, use a glass scraper to scrape the glass in the shower room. It does not take a lot of time and effort. 3. If there is dirt on the glass in the shower room, you can wash it off with a mixture of vinegar and a little salt. You can also use toothpaste to spray the bathroom glass or frosted glass, then wipe it with a toothbrush, and then clean the frosted glass with warm water. 4. You can also use the toilet cleaner to clean it. In addition, you should also pay attention to keeping it clean at ordinary times. You can rinse it with a spray nozzle every day when you take a bath. 5. Spray the glass water evenly on the surface of the glass, and then wipe it clean with a dry soft cloth. Note that toughened glass cannot be scratched with hard objects, so as not to endanger the safety of the glass. The glass in the shower room is cleaned daily, and it can be cleaned every time after washing to ensure the long-lasting beauty of the shower room.

→

How to identify whether the shower room is tempered glass

　　There is a danger of self-explosion in shower room glass, but it does not mean that consumers have no way to reduce the hazard. The method is to put an explosion-proof film on it. In this way, the glass ballast can be prevented from flying indiscriminately, and the damage of the glass to the human body is fundamentally reduced. 　　Be careful when choosing explosion-proof membranes, try to choose explosion-proof membranes certified by the International Window Film Association and qualified to produce safety membranes. Some inferior films whose main components are polyvinyl chloride, not only can not provide any protection in the event of accidents, but also contain toxic substances, which will cause chronic damage in long-term use. 　　How to tell if the shower room you bought is tempered glass? 　　Industry insiders suggest: When buying, you must look at the name of the factory, the site and the certificate of conformity, and it is best to have 3c certification. You must choose these products that are all complete, not cheap. When identifying, you can knock the glass with your hand. If the glass emits a crisp sound, it means that the glass is tempered glass, otherwise it is ordinary glass. After the purchase, the manufacturer must also be required to install it on site, so as not to increase the criticality factor due to improper installation. 　　 Even if it is tempered glass, there is still a danger of blasting. In order to reduce the spontaneous explosion of the overall shower room, consumers can rinse the glass door with hot water for five minutes before using it to ensure that it is okay before continuing to use it.

→

How to clean the shower room glass

1. Pour a little shampoo into the washbasin, mix it evenly, and dip it with a rag. This will make the glass door extra clean and bright. Bathroom glass cleaning method 2. Coat the glass door with chalk, grey water or gypsum powder in advance. After the glass is dry, wipe it directly with a dry cloth to remove stains and wipe the glass clean. Bathroom glass cleaning method 3. For the aged dirt accumulated in the corner of the glass door, you can mix it with half cool and half water when cleaning, put it in a watering can, spray it on the glass, and then gently wipe it off with old newspaper. Bathroom glass cleaning method 4. Occasionally there will be black spots on the glass door, then you can wipe it with a cloth dipped in toothpaste. Bathroom glass cleaning method 5. The use of plastic wrap and a damp cloth sprayed with detergent can also "regenerate" the glass door that is often stained with oil. First, spray the glass door with a cleaning agent, and then paste the plastic wrap to soften the solidified oil stains. After ten minutes, peel off the plastic wrap and wipe with a damp cloth. If there are handwritings on the glass door, you can rub it with a rubber soak in water, and then wipe it with a damp cloth. If there is paint on the glass door, wipe it with cotton dipped in hot vinegar. Wipe the glass with a clean dry cloth dipped in alcohol to make it as bright as crystal. Bathroom glass cleaning method 6. If the bathroom mirror is stained with oil, you can use a rag and take tea to clean it, but don't let the tea seep to the edge or back of the mirror, so as not to damage the coating on the back of the mirror. It can also be wiped with a soft cloth or gauze cloth dipped in some kerosene or wax. Do not wipe it directly with a wet cloth, otherwise the mirror surface will be more blurred. Dirty mirrors can also be wiped with a cloth dipped in pure alcohol or white vinegar against water, or wiped with slices of white radish, and then wiped dry with a dry cloth. Wipe the mirror and frame with a rag dipped in milk to restore clarity and brightness.

→

What is the installation method of the glass shower room?

1. Prepare the necessary tools for use. 　　2. Install the bottom basin: assemble the bottom basin parts and adjust the level of the bottom basin to ensure that there is no water in the basin and bottom. The hose can be expanded and contracted with the distance to connect the bottom of the basin and the floor drain firmly. 　　3. Test and protection: After installation, a water test is required to ensure that the water is unimpeded. Fourth, find the location and punch: Use a pencil and a level to determine the drilling location of the aluminum against the wall, and use a percussion drill to punch. 　　4. Install aluminum: knock in rubber particles in the drilled hole, and lock the aluminum bar to the wall with screws. 　　5. Fix the glass: clamp and lock the glass to the hole in the bottom basin, and then fix it with screws. 　　6. Install the jacking pipe: find the corresponding position above the fixed glass to drill holes, install the (straight mouth/oblique mouth) fixing seat and connect the jacking pipe. Fix it to the top of the glass with an elbow sleeve. 　　7. Install the device rack: install the device rack at the calibrated position, tighten the layer nut, fix the layer glass, and keep it vertical and horizontal. Pay attention to waterproofing under the aluminum material that fixes the glass. 　　 8. Install the movable door: Install the hardware of the movable door, and install the hinge on the reserved hole of the fixed door. After installation, adjust the position of the shaft core of the lotus leaf until the closing feel is the best. 　　9. Waterproof: Install suction strips or water-retaining rubber strips on the side or under the glass as required. Use silica gel to close the joints between the aluminum and the wall, the glass and the bottom basin. 　　10. Debugging and tightening: check whether each part is comfortable and smooth to use, and adjust in time if any problems are found. Tighten the corresponding screws after adjustment to make the entire shower room stronger. 　　11. Finishing work: Clip the decorative aluminum strips into the wall-mounted aluminum material to ensure its neat appearance. Finally, wipe the entire shower room with a rag.

→

What are the ways to purchase shower room hardware accessories?

Shower room hardware accessories-pulley The first is the frame side. Now it is mainly divided into two materials: aluminum alloy and stainless steel. Stainless steel is acid and alkali resistant and has better quality. Therefore, it is slightly more expensive than 200-300 yuan per square meter. However, not all stainless steels are high-end products, domestically produced 201 , 202 products are easy to rust, at least 304 can be used to resist rust. Shower room hardware accessories-glass The next thing to examine is the glass, which is also determined by the quality of the frame. A good stainless steel can withstand 10mm and 12mm thick tempered glass, a good aluminum alloy can handle 8mm thick glass, and a poorly stressed frame can only withstand The safety of 5mm and 6mm thick glass is naturally lower. In terms of glass selection, automotive-grade glass has superior toughness, and the surface looks very transparent, without particles and pinholes. There is also a kind of easy-to-clean glass, shampoo and body soap stick to it, it will slide off like water drops, and will not have a layer of gray dirt after long-term use like ordinary glass. Shower room hardware accessories-water retaining stone There are two kinds of water retaining stones, man-made and natural. Natural stone is not too high. It is suitable for bathrooms that have already been paved with floor tiles. Artificial stone is formed at one time and has no seams, so it is not easy to keep debris, but it is relatively high and suitable for rough decoration. Shower room hardware accessories-track The track is also a technical job to buy a shower room, most of the shower rooms have problems in the later period of use, which are caused by the pulley. Many pulleys are covered with nylon jackets, but there is something inside. It is best to use 204 stainless steel pulley, and secondly choose copper material. As for alloy material, it is easy to rust, which is a poor material, and it is easy to fall off after a long time. It is not difficult to distinguish whether the pulley is good or bad. You can try it by hand. The stainless steel rolls out smoothly, while the relatively poor products require hard work to move around.

→